Shanghai Pharmaceutical Machinery Co. Ltd

Model Number: AEF-1030 Brand Name: AFE-1030 Key Specifications/Special Features: Automatic vial arranging machineIt can automatically arranging various plastic vials and it is the frontal machine of filling machineVial arranging oscillator surges the plastic vials into correct direction for sending them to the conveyer of vial arranging machineThe plastic vials pass through the conveyer and enter the inlet of vial arranging turntableFinally from the outlet of the turntable, the vial poking rod sends the plastic vials to the inlet conveyer of the filling machine, by means of the turntable rotating, and starts the filling operationThe vial full detecting sensor checks all the vials entered the inlet conveyer, if vials on the conveyer is full; the vial arranging machine will stop automaticallyFilling machine:The filling machine consists of some station devices such as filling, plug falling, cap falling and screw cappingBelow is its sketch layoutFrom the vial arranging machine, plastic vials pass through the inlet conveyer and enter the turntable of filling machine rotating along withThe vial detecting sensor checks the plastic vial and control whether starts filling or notThis sensor first sends the signal to inner plc of the machine, by which to control filling with vial or stop filling without vial
When the plastic vial enters the filling station, if the sensor detected there is vial, the filling will start
After filling the plastic vial will enter the plug falling station which will put down the plug, and then enter plug press station
After plug press, before enter cap falling station, the plug detecting sensor will check the plugged vial to decide next cap falling whether fulfill or not, if there is plugged vial, the cap falling device will put down the cap when the vial come by, otherwise no cap falling
After cap falling the plastic vial pass through the screw capping station and tighten the cap
Finally from the turntable, the vial poking rod will poke out and send the filled and capped product to the vial output tray receiver
Basic specifications refer to its nameplate:
Dimensions: 2050x1550x1400mm(L x W x H)
Total weight: 520kg
Power of main motor: 0.75kW with stepless speed control
General power: 1.1kW
Voltage: AC 220V
Filling capacity: 50-60 vials/minute with one operator
Medicine dosage: 3-15mL
Filling precision: more than 99%
The successful rate of plugging: more than 99%
The successful rate of screw capping: more than 99%